--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/CSP2/CSP2_env/env-d9b9114564458d9d-741b3de822f2aaca6c6caa4325c4afce/include/lzma/block.h	Tue Mar 18 17:55:14 2025 -0400
@@ -0,0 +1,694 @@
+/* SPDX-License-Identifier: 0BSD */
+
+/**
+ * \file        lzma/block.h
+ * \brief       .xz Block handling
+ * \note        Never include this file directly. Use <lzma.h> instead.
+ */
+
+/*
+ * Author: Lasse Collin
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/**
+ * \brief       Options for the Block and Block Header encoders and decoders
+ *
+ * Different Block handling functions use different parts of this structure.
+ * Some read some members, other functions write, and some do both. Only the
+ * members listed for reading need to be initialized when the specified
+ * functions are called. The members marked for writing will be assigned
+ * new values at some point either by calling the given function or by
+ * later calls to lzma_code().
+ */
+typedef struct {
+	/**
+	 * \brief       Block format version
+	 *
+	 * To prevent API and ABI breakages when new features are needed,
+	 * a version number is used to indicate which members in this
+	 * structure are in use:
+	 *   - liblzma >= 5.0.0: version = 0 is supported.
+	 *   - liblzma >= 5.1.4beta: Support for version = 1 was added,
+	 *     which adds the ignore_check member.
+	 *
+	 * If version is greater than one, most Block related functions
+	 * will return LZMA_OPTIONS_ERROR (lzma_block_header_decode() works
+	 * with any version value).
+	 *
+	 * Read by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_unpadded_size()
+	 *  - lzma_block_total_size()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_uncomp_encode()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_decode()
+	 */
+	uint32_t version;
+
+	/**
+	 * \brief       Size of the Block Header field in bytes
+	 *
+	 * This is always a multiple of four.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_unpadded_size()
+	 *  - lzma_block_total_size()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_uncomp_encode()
+	 */
+	uint32_t header_size;
+#	define LZMA_BLOCK_HEADER_SIZE_MIN 8
+#	define LZMA_BLOCK_HEADER_SIZE_MAX 1024
+
+	/**
+	 * \brief       Type of integrity Check
+	 *
+	 * The Check ID is not stored into the Block Header, thus its value
+	 * must be provided also when decoding.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_unpadded_size()
+	 *  - lzma_block_total_size()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_buffer_decode()
+	 */
+	lzma_check check;
+
+	/**
+	 * \brief       Size of the Compressed Data in bytes
+	 *
+	 * Encoding: If this is not LZMA_VLI_UNKNOWN, Block Header encoder
+	 * will store this value to the Block Header. Block encoder doesn't
+	 * care about this value, but will set it once the encoding has been
+	 * finished.
+	 *
+	 * Decoding: If this is not LZMA_VLI_UNKNOWN, Block decoder will
+	 * verify that the size of the Compressed Data field matches
+	 * compressed_size.
+	 *
+	 * Usually you don't know this value when encoding in streamed mode,
+	 * and thus cannot write this field into the Block Header.
+	 *
+	 * In non-streamed mode you can reserve space for this field before
+	 * encoding the actual Block. After encoding the data, finish the
+	 * Block by encoding the Block Header. Steps in detail:
+	 *
+	 *  - Set compressed_size to some big enough value. If you don't know
+	 *    better, use LZMA_VLI_MAX, but remember that bigger values take
+	 *    more space in Block Header.
+	 *
+	 *  - Call lzma_block_header_size() to see how much space you need to
+	 *    reserve for the Block Header.
+	 *
+	 *  - Encode the Block using lzma_block_encoder() and lzma_code().
+	 *    It sets compressed_size to the correct value.
+	 *
+	 *  - Use lzma_block_header_encode() to encode the Block Header.
+	 *    Because space was reserved in the first step, you don't need
+	 *    to call lzma_block_header_size() anymore, because due to
+	 *    reserving, header_size has to be big enough. If it is "too big",
+	 *    lzma_block_header_encode() will add enough Header Padding to
+	 *    make Block Header to match the size specified by header_size.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_unpadded_size()
+	 *  - lzma_block_total_size()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_compressed_size()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_uncomp_encode()
+	 *  - lzma_block_buffer_decode()
+	 */
+	lzma_vli compressed_size;
+
+	/**
+	 * \brief       Uncompressed Size in bytes
+	 *
+	 * This is handled very similarly to compressed_size above.
+	 *
+	 * uncompressed_size is needed by fewer functions than
+	 * compressed_size. This is because uncompressed_size isn't
+	 * needed to validate that Block stays within proper limits.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_decode()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_uncomp_encode()
+	 *  - lzma_block_buffer_decode()
+	 */
+	lzma_vli uncompressed_size;
+
+	/**
+	 * \brief       Array of filters
+	 *
+	 * There can be 1-4 filters. The end of the array is marked with
+	 * .id = LZMA_VLI_UNKNOWN.
+	 *
+	 * Read by:
+	 *  - lzma_block_header_size()
+	 *  - lzma_block_header_encode()
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_buffer_decode()
+	 *
+	 * Written by:
+	 *  - lzma_block_header_decode(): Note that this does NOT free()
+	 *    the old filter options structures. All unused filters[] will
+	 *    have .id == LZMA_VLI_UNKNOWN and .options == NULL. If
+	 *    decoding fails, all filters[] are guaranteed to be
+	 *    LZMA_VLI_UNKNOWN and NULL.
+	 *
+	 * \note        Because of the array is terminated with
+	 *              .id = LZMA_VLI_UNKNOWN, the actual array must
+	 *              have LZMA_FILTERS_MAX + 1 members or the Block
+	 *              Header decoder will overflow the buffer.
+	 */
+	lzma_filter *filters;
+
+	/**
+	 * \brief       Raw value stored in the Check field
+	 *
+	 * After successful coding, the first lzma_check_size(check) bytes
+	 * of this array contain the raw value stored in the Check field.
+	 *
+	 * Note that CRC32 and CRC64 are stored in little endian byte order.
+	 * Take it into account if you display the Check values to the user.
+	 *
+	 * Written by:
+	 *  - lzma_block_encoder()
+	 *  - lzma_block_decoder()
+	 *  - lzma_block_buffer_encode()
+	 *  - lzma_block_uncomp_encode()
+	 *  - lzma_block_buffer_decode()
+	 */
+	uint8_t raw_check[LZMA_CHECK_SIZE_MAX];
+
+	/*
+	 * Reserved space to allow possible future extensions without
+	 * breaking the ABI. You should not touch these, because the names
+	 * of these variables may change. These are and will never be used
+	 * with the currently supported options, so it is safe to leave these
+	 * uninitialized.
+	 */
+
+	/** \private     Reserved member. */
+	void *reserved_ptr1;
+
+	/** \private     Reserved member. */
+	void *reserved_ptr2;
+
+	/** \private     Reserved member. */
+	void *reserved_ptr3;
+
+	/** \private     Reserved member. */
+	uint32_t reserved_int1;
+
+	/** \private     Reserved member. */
+	uint32_t reserved_int2;
+
+	/** \private     Reserved member. */
+	lzma_vli reserved_int3;
+
+	/** \private     Reserved member. */
+	lzma_vli reserved_int4;
+
+	/** \private     Reserved member. */
+	lzma_vli reserved_int5;
+
+	/** \private     Reserved member. */
+	lzma_vli reserved_int6;
+
+	/** \private     Reserved member. */
+	lzma_vli reserved_int7;
+
+	/** \private     Reserved member. */
+	lzma_vli reserved_int8;
+
+	/** \private     Reserved member. */
+	lzma_reserved_enum reserved_enum1;
+
+	/** \private     Reserved member. */
+	lzma_reserved_enum reserved_enum2;
+
+	/** \private     Reserved member. */
+	lzma_reserved_enum reserved_enum3;
+
+	/** \private     Reserved member. */
+	lzma_reserved_enum reserved_enum4;
+
+	/**
+	 * \brief       A flag to Block decoder to not verify the Check field
+	 *
+	 * This member is supported by liblzma >= 5.1.4beta if .version >= 1.
+	 *
+	 * If this is set to true, the integrity check won't be calculated
+	 * and verified. Unless you know what you are doing, you should
+	 * leave this to false. (A reason to set this to true is when the
+	 * file integrity is verified externally anyway and you want to
+	 * speed up the decompression, which matters mostly when using
+	 * SHA-256 as the integrity check.)
+	 *
+	 * If .version >= 1, read by:
+	 *   - lzma_block_decoder()
+	 *   - lzma_block_buffer_decode()
+	 *
+	 * Written by (.version is ignored):
+	 *   - lzma_block_header_decode() always sets this to false
+	 */
+	lzma_bool ignore_check;
+
+	/** \private     Reserved member. */
+	lzma_bool reserved_bool2;
+
+	/** \private     Reserved member. */
+	lzma_bool reserved_bool3;
+
+	/** \private     Reserved member. */
+	lzma_bool reserved_bool4;
+
+	/** \private     Reserved member. */
+	lzma_bool reserved_bool5;
+
+	/** \private     Reserved member. */
+	lzma_bool reserved_bool6;
+
+	/** \private     Reserved member. */
+	lzma_bool reserved_bool7;
+
+	/** \private     Reserved member. */
+	lzma_bool reserved_bool8;
+
+} lzma_block;
+
+
+/**
+ * \brief       Decode the Block Header Size field
+ *
+ * To decode Block Header using lzma_block_header_decode(), the size of the
+ * Block Header has to be known and stored into lzma_block.header_size.
+ * The size can be calculated from the first byte of a Block using this macro.
+ * Note that if the first byte is 0x00, it indicates beginning of Index; use
+ * this macro only when the byte is not 0x00.
+ *
+ * There is no encoding macro because lzma_block_header_size() and
+ * lzma_block_header_encode() should be used.
+ */
+#define lzma_block_header_size_decode(b) (((uint32_t)(b) + 1) * 4)
+
+
+/**
+ * \brief       Calculate Block Header Size
+ *
+ * Calculate the minimum size needed for the Block Header field using the
+ * settings specified in the lzma_block structure. Note that it is OK to
+ * increase the calculated header_size value as long as it is a multiple of
+ * four and doesn't exceed LZMA_BLOCK_HEADER_SIZE_MAX. Increasing header_size
+ * just means that lzma_block_header_encode() will add Header Padding.
+ *
+ * \note        This doesn't check that all the options are valid i.e. this
+ *              may return LZMA_OK even if lzma_block_header_encode() or
+ *              lzma_block_encoder() would fail. If you want to validate the
+ *              filter chain, consider using lzma_memlimit_encoder() which as
+ *              a side-effect validates the filter chain.
+ *
+ * \param       block   Block options
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: Size calculated successfully and stored to
+ *                block->header_size.
+ *              - LZMA_OPTIONS_ERROR: Unsupported version, filters or
+ *                filter options.
+ *              - LZMA_PROG_ERROR: Invalid values like compressed_size == 0.
+ */
+extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Encode Block Header
+ *
+ * The caller must have calculated the size of the Block Header already with
+ * lzma_block_header_size(). If a value larger than the one calculated by
+ * lzma_block_header_size() is used, the Block Header will be padded to the
+ * specified size.
+ *
+ * \param       block       Block options to be encoded.
+ * \param[out]  out         Beginning of the output buffer. This must be
+ *                          at least block->header_size bytes.
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: Encoding was successful. block->header_size
+ *                bytes were written to output buffer.
+ *              - LZMA_OPTIONS_ERROR: Invalid or unsupported options.
+ *              - LZMA_PROG_ERROR: Invalid arguments, for example
+ *                block->header_size is invalid or block->filters is NULL.
+ */
+extern LZMA_API(lzma_ret) lzma_block_header_encode(
+		const lzma_block *block, uint8_t *out)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Decode Block Header
+ *
+ * block->version should (usually) be set to the highest value supported
+ * by the application. If the application sets block->version to a value
+ * higher than supported by the current liblzma version, this function will
+ * downgrade block->version to the highest value supported by it. Thus one
+ * should check the value of block->version after calling this function if
+ * block->version was set to a non-zero value and the application doesn't
+ * otherwise know that the liblzma version being used is new enough to
+ * support the specified block->version.
+ *
+ * The size of the Block Header must have already been decoded with
+ * lzma_block_header_size_decode() macro and stored to block->header_size.
+ *
+ * The integrity check type from Stream Header must have been stored
+ * to block->check.
+ *
+ * block->filters must have been allocated, but they don't need to be
+ * initialized (possible existing filter options are not freed).
+ *
+ * \param[out]  block       Destination for Block options
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() (and also free()
+ *                          if an error occurs).
+ * \param       in          Beginning of the input buffer. This must be
+ *                          at least block->header_size bytes.
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: Decoding was successful. block->header_size
+ *                bytes were read from the input buffer.
+ *              - LZMA_OPTIONS_ERROR: The Block Header specifies some
+ *                unsupported options such as unsupported filters. This can
+ *                happen also if block->version was set to a too low value
+ *                compared to what would be required to properly represent
+ *                the information stored in the Block Header.
+ *              - LZMA_DATA_ERROR: Block Header is corrupt, for example,
+ *                the CRC32 doesn't match.
+ *              - LZMA_PROG_ERROR: Invalid arguments, for example
+ *                block->header_size is invalid or block->filters is NULL.
+ */
+extern LZMA_API(lzma_ret) lzma_block_header_decode(lzma_block *block,
+		const lzma_allocator *allocator, const uint8_t *in)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Validate and set Compressed Size according to Unpadded Size
+ *
+ * Block Header stores Compressed Size, but Index has Unpadded Size. If the
+ * application has already parsed the Index and is now decoding Blocks,
+ * it can calculate Compressed Size from Unpadded Size. This function does
+ * exactly that with error checking:
+ *
+ *  - Compressed Size calculated from Unpadded Size must be positive integer,
+ *    that is, Unpadded Size must be big enough that after Block Header and
+ *    Check fields there's still at least one byte for Compressed Size.
+ *
+ *  - If Compressed Size was present in Block Header, the new value
+ *    calculated from Unpadded Size is compared against the value
+ *    from Block Header.
+ *
+ * \note        This function must be called _after_ decoding the Block Header
+ *              field so that it can properly validate Compressed Size if it
+ *              was present in Block Header.
+ *
+ * \param       block           Block options: block->header_size must
+ *                              already be set with lzma_block_header_size().
+ * \param       unpadded_size   Unpadded Size from the Index field in bytes
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: block->compressed_size was set successfully.
+ *              - LZMA_DATA_ERROR: unpadded_size is too small compared to
+ *                block->header_size and lzma_check_size(block->check).
+ *              - LZMA_PROG_ERROR: Some values are invalid. For example,
+ *                block->header_size must be a multiple of four and
+ *                between 8 and 1024 inclusive.
+ */
+extern LZMA_API(lzma_ret) lzma_block_compressed_size(
+		lzma_block *block, lzma_vli unpadded_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Calculate Unpadded Size
+ *
+ * The Index field stores Unpadded Size and Uncompressed Size. The latter
+ * can be taken directly from the lzma_block structure after coding a Block,
+ * but Unpadded Size needs to be calculated from Block Header Size,
+ * Compressed Size, and size of the Check field. This is where this function
+ * is needed.
+ *
+ * \param       block   Block options: block->header_size must already be
+ *                      set with lzma_block_header_size().
+ *
+ * \return      Unpadded Size on success, or zero on error.
+ */
+extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Calculate the total encoded size of a Block
+ *
+ * This is equivalent to lzma_block_unpadded_size() except that the returned
+ * value includes the size of the Block Padding field.
+ *
+ * \param       block   Block options: block->header_size must already be
+ *                      set with lzma_block_header_size().
+ *
+ * \return      On success, total encoded size of the Block. On error,
+ *              zero is returned.
+ */
+extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Initialize .xz Block encoder
+ *
+ * Valid actions for lzma_code() are LZMA_RUN, LZMA_SYNC_FLUSH (only if the
+ * filter chain supports it), and LZMA_FINISH.
+ *
+ * The Block encoder encodes the Block Data, Block Padding, and Check value.
+ * It does NOT encode the Block Header which can be encoded with
+ * lzma_block_header_encode().
+ *
+ * \param       strm    Pointer to lzma_stream that is at least initialized
+ *                      with LZMA_STREAM_INIT.
+ * \param       block   Block options: block->version, block->check,
+ *                      and block->filters must have been initialized.
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: All good, continue with lzma_code().
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_UNSUPPORTED_CHECK: block->check specifies a Check ID
+ *                that is not supported by this build of liblzma. Initializing
+ *                the encoder failed.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_encoder(
+		lzma_stream *strm, lzma_block *block)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize .xz Block decoder
+ *
+ * Valid actions for lzma_code() are LZMA_RUN and LZMA_FINISH. Using
+ * LZMA_FINISH is not required. It is supported only for convenience.
+ *
+ * The Block decoder decodes the Block Data, Block Padding, and Check value.
+ * It does NOT decode the Block Header which can be decoded with
+ * lzma_block_header_decode().
+ *
+ * \param       strm    Pointer to lzma_stream that is at least initialized
+ *                      with LZMA_STREAM_INIT.
+ * \param       block   Block options
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: All good, continue with lzma_code().
+ *              - LZMA_PROG_ERROR
+ *              - LZMA_MEM_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_decoder(
+		lzma_stream *strm, lzma_block *block)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Calculate maximum output size for single-call Block encoding
+ *
+ * This is equivalent to lzma_stream_buffer_bound() but for .xz Blocks.
+ * See the documentation of lzma_stream_buffer_bound().
+ *
+ * \param       uncompressed_size   Size of the data to be encoded with the
+ *                                  single-call Block encoder.
+ *
+ * \return      Maximum output size in bytes for single-call Block encoding.
+ */
+extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Single-call .xz Block encoder
+ *
+ * In contrast to the multi-call encoder initialized with
+ * lzma_block_encoder(), this function encodes also the Block Header. This
+ * is required to make it possible to write appropriate Block Header also
+ * in case the data isn't compressible, and different filter chain has to be
+ * used to encode the data in uncompressed form using uncompressed chunks
+ * of the LZMA2 filter.
+ *
+ * When the data isn't compressible, header_size, compressed_size, and
+ * uncompressed_size are set just like when the data was compressible, but
+ * it is possible that header_size is too small to hold the filter chain
+ * specified in block->filters, because that isn't necessarily the filter
+ * chain that was actually used to encode the data. lzma_block_unpadded_size()
+ * still works normally, because it doesn't read the filters array.
+ *
+ * \param       block       Block options: block->version, block->check,
+ *                          and block->filters must have been initialized.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_size     Size of the input buffer
+ * \param[out]  out         Beginning of the output buffer
+ * \param[out]  out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_UNSUPPORTED_CHECK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_buffer_encode(
+		lzma_block *block, const lzma_allocator *allocator,
+		const uint8_t *in, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Single-call uncompressed .xz Block encoder
+ *
+ * This is like lzma_block_buffer_encode() except this doesn't try to
+ * compress the data and instead encodes the data using LZMA2 uncompressed
+ * chunks. The required output buffer size can be determined with
+ * lzma_block_buffer_bound().
+ *
+ * Since the data won't be compressed, this function ignores block->filters.
+ * This function doesn't take lzma_allocator because this function doesn't
+ * allocate any memory from the heap.
+ *
+ * \param       block       Block options: block->version, block->check,
+ *                          and block->filters must have been initialized.
+ * \param       in          Beginning of the input buffer
+ * \param       in_size     Size of the input buffer
+ * \param[out]  out         Beginning of the output buffer
+ * \param[out]  out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_UNSUPPORTED_CHECK
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_uncomp_encode(lzma_block *block,
+		const uint8_t *in, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Single-call .xz Block decoder
+ *
+ * This is single-call equivalent of lzma_block_decoder(), and requires that
+ * the caller has already decoded Block Header and checked its memory usage.
+ *
+ * \param       block       Block options
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_pos      The next byte will be read from in[*in_pos].
+ *                          *in_pos is updated only if decoding succeeds.
+ * \param       in_size     Size of the input buffer; the first byte that
+ *                          won't be read is in[in_size].
+ * \param[out]  out         Beginning of the output buffer
+ * \param[out]  out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      Possible lzma_ret values:
+ *              - LZMA_OK: Decoding was successful.
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_BUF_ERROR: Output buffer was too small.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_block_buffer_decode(
+		lzma_block *block, const lzma_allocator *allocator,
+		const uint8_t *in, size_t *in_pos, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow;